SMC BMC Sinks, bath tubs and shower plates
We supply the best quality SMC and BMC materials for both direct or PIMC (Powder In-Mould Coating) finish: kitchen sinks, shower trays, bath tubs, accessories, etc. Depending on the specific application, we will recommend you the best tailor-made formulation to meet your requirements.
VERKID® SMC
VERKID® BMC
| Abrasion | Finish | Flow |
| Low Shrink | Food Contact | Chemical Resistance |
| Low Pressure | Flame Resistance | Hydrophobe |
| Low Profile | Low Density | UV Stable |
| Paintable | PIMC | Scratch Resistance |
| Reactive | Resistance | Surface |
| PROPERTY | STANDARD | VALUE | UNITY |
| Glass Fiber Content | IT.CA-12 | 15 — 35 | % |
| Shrinkage | ISO 2577 | 0.00 — 0.20 | % |
| Flexural Strength | EN ISO 14125 | 70 — 250 | MPa |
| Flexural E-Modulus | EN ISO 14125 | 8000 — 12000 | MPa |
| Impact Strength (Charpy) | EN ISO 179 | 20 — 120 | kJ/m2 |
| Density | EN ISO 1183-1 | 1.6 — 1.9 | g/cm3 |
| Water Absorption | EN ISO 62 | < 0.3 | % |
| Heat Distortion Temperature | ISO 75-2-A | >280 | ºC |
The values will depend on the specific formulation
