SMC Service trays
We produce a wide range of SMC materials to mould service trays. Depending on the specific application, we will recommend you the best tailor-made formulation to meet your requirements.
VERKID® SMC
| Abrasion | Finish | High Temperature |
| Low Shrink | Food Contact | Chemical Resistance |
| Low Pressure | Flame Resistance | Hydrophobe |
| Paintable | PIMC | Scratch Resistance |
| Reactive | Resistance | Surface |
| Antibacterian |
| PROPERTY | STANDARD | VALUE | UNITY |
| Glass Fiber Content | IT.CA-12 | 20 — 30 | % |
| Shrinkage | ISO 2577 | 0.05 — 0.20 | % |
| Flexural Strength | EN ISO 14125 | 120 — 200 | MPa |
| Flexural E-Modulus | EN ISO 14125 | 8500 — 12000 | MPa |
| Impact Strength (Charpy) | EN ISO 179 | 60 — 100 | kJ/m2 |
| Density | EN ISO 1183-1 | 1.7 — 1.9 | g/cm3 |
| Water Absorption | EN ISO 62 | < 0.3 | % |
| Heat Distortion Temperature | ISO 75-2-A | >280 | ºC |
The values will depend on the specific formulation
